Anhui SURE ELECTRONICS CO.,LTD
LA-FAST ELECTRONICS CO.,LTD
Add to Cart
Features:
1. Microprocessor control swith mode Suit battery:
2. Ideal for starting,Marine,Mobility and solar applications ŸSLA/GEL/AGM 12V 30~240Ah
3. Fully automatic 5 stages charging process, VRLA/WET battery 24V 30~240AH
4. 2 Leds indicator for battery charging 50%,100%,An independent failure indicator Car,Marine,vehicle,starting,Mobility,Solar
5. 12V/24V double charging output for use with starting and deep cycle batteries Emergency light, Industrial cleaning
6. Protections:Short circuit/OVP/OCP/Overload/Polarity reversed equipment
7. Superior charging and maintaing
8. 100% full load and burn-in test
9. 2 years warranty
| Product Name | Automatic Battery Charger |
| Input Voltage | AC 100~240V 50/60HZ |
| Outlet | Custom design |
| Output voltage | 24V 12V |
| Output current | 10A |
| Protection | OVP/OCP/Short circuit |
| Output Reverser Protection | Yes |
| Charge mode | Auto 5 stages |
| Charging end | Float Charing |
| Certificate | CE FCC ROHS PSE RCM |
| Color | Black |
| Charge manage | Microprocessor Controlled |
| Warranty | 18 Months |
Description
Microprocessor Control (CPU).
3-STAGE AUTOMATIC CHARGING:
This is a fully automatic battery charger with 3 charge stages.
Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.
3-stage chargers are suitable for most lead acid battery:Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries.
1: Input Characteristics:
Input Voltage: 100-240V AC
Input Frequency: 50Hz or 60Hz and single phase.
Inrush Current (cold start):30A Max.@110Vac/60HZ/ 60A Max.@230Vac/50HZ
Efficiency: ≥85.0% 230Vac/50Hz(Typical full load)
2: Output Characteristics:
Constant Charging Voltage: 14.7V Float charge 13.8V
C:Charging Mode Intelligent 12V 5-6A lead acid battery charger
3 Stages, CC, CV, Trickle
4: Safety Test for battery charger
Hi-pot Test:15KVac 5mA 3 Seconds between input and output test
Resistance:The liftpo4 battery charger insulation resistance shall be not less 30M ohms after application of 500Vdc/10mA for 3 Seconds
Drop test: Height: The wheelchair battery chargerconform to BS EN60068-2-32:1993 TEST ED: free fall appendix B
5: Protection for battery charger
Over Voltage Protection:The power supply will be auto recovered when faults remove
Over Current Protection: Charger output current does not exceed the set maximum battery charging current.
Over Short Circuit Protection :Battery charger output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed)
Over reverse polarity Protection When the battery charger output line reversed after the charger will not work until the right user access only to start.
1: Compatible with most brands of electric vehicles
2: Applicable to most brands of electric vehicles in the market
3: Zero voltage output
4: Reverse polarity protection
5: Dual timing
6: SMD process
7: ABS flame retardant box
8: Good quality Charger Cable
9: MM Thicker Charger Cable
10: Safe Silent
11: Reject inferior
12: Overload protection
13: Short-circuit protection
14: Overvoltage protection
15: Overcurrent protection
Our Service
1. OEM Manufacturing welcome: Product, Package,logo and brand.
2. Sample order :Free sampls but you need pay for freight.
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 20 to 40 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost or
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.