
Add to Cart
Features:
Digital display: digital display voltage, electricity, visualization of charging schedule
Intelligent temperature control: According to the temperature to start cooling, silent charging.
Efficient conversion: fast charging, high conversion rate.
Energy Saving: 0.3W standby power
Five-fold protection of smart chip:
* Over temperature protection
* Overcurrent protection
* Reverse connection protection
* Short circuit protection
* Overvoltage protection
Import ST chip, microcomputer control circuit
Widely used in: cars, trucks, stackers, scooter, toy cars, motorcycles
Item | Battery charger |
Moldel | 12v |
Voltage | 210-240V 50/60hz 1A |
Output | DC 6V 2A,12V 2A/6A |
Colour | Blue |
Size | 15.9*5.8*8.9cm |
Electric current | 2/6Amp |
Usage | Battery car, motorcycle, toy car, car charging |
Five-fold protection of smart chip: * Over temperature protection |
AC input voltage | 100-240Vac 50~60Hz | Material | Aluminum |
DC output voltage & current | 12V 2A | Method | CC/CV |
Specification | 150 * 85 * 60 mm | N.W. | 1 KG |
Operating temperature | -10℃~+50℃ | Storage Temperature | 40℃~+80℃ |
Warranty | 3 years | Certificates | CE/ROHS/FCC/SAA |
The indicator of LED colors: "RED" means charging, "GREEN" means charging is complete. |
Description |
Microprocessor Control (CPU). 3-STAGE AUTOMATIC CHARGING: This is a fully automatic battery charger with 3 charge stages. Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely. 3-stage chargers are suitable for most lead acid battery:Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries. 1: Input Characteristics: Input Voltage: 100-240V AC Input Frequency: 50Hz or 60Hz and single phase. Inrush Current (cold start):30A Max.@110Vac/60HZ/ 60A Max.@230Vac/50HZ Efficiency: ≥85.0% 230Vac/50Hz(Typical full load) 2: Output Characteristics: Constant Charging Voltage: 14.7V Float charge 13.8V C:Charging Mode Intelligent 12V 5-6A lead acid battery charger 3 Stages, CC, CV, Trickle 4: Safety Test for battery charger Hi-pot Test:15KVac 5mA 3 Seconds between input and output test Resistance:The liftpo4 battery charger insulation resistance shall be not less 30M ohms after application of 500Vdc/10mA for 3 Seconds Drop test: Height: The wheelchair battery chargerconform to BS EN60068-2-32:1993 TEST ED: free fall appendix B 5: Protection for battery charger Over Voltage Protection:The power supply will be auto recovered when faults remove Over Current Protection: Charger output current does not exceed the set maximum battery charging current. Over Short Circuit Protection :Battery charger output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed) Over reverse polarity Protection When the battery charger output line reversed after the charger will not work until the right user access only to start. |
Our Service
1. OEM Manufacturing welcome: Product, Package,logo and brand.
2. Sample order :Free sampls but you need pay for freight.
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.